泉州联进机械有限公司
QUANZHOU LIANJIN MACHINE CO., LTD
切
胶
机
使
用
说
明
Rubber Cutter Cutting/Bale Cutter Usage
用途:切丁苯标胶顺丁等胶料。
特点:1.切完之后,自动上升,操作省时人性化。
2.刀片材质特别设计,切料利索。
主要技术参数 Technical Parameters | |
型号 Model | LJ-C600 |
机型Systems | 液压式 |
外型尺寸 Appearance Size L*W*H(mm) | 820*760*1670 |
工作宽度Working Width(mm) | 600 |
功率Power(KW) | 2.2 |
重量Weight(kg) | 300 |
使用说明:
公共设备电力:电压380V,50Hz。
主电源线:2.5平方毫米 四芯线
1. 加68# 液压油显示油表至80%。液压油一定要保持干净,油箱不能有杂物进入,以免影响油泵,电池阀损坏。
2. 切料时手不要接近刀口。
3. 液压油要按时更换(一般一年更换一次)。
4. 油泵压力不要随意调整,一般60kg可以正常工作。
5. 自动档按住启动开关2秒切刀自动下降自动上升。手动档需长按启动开关切刀下降,松开自动上升。
Purpose:Cutting the butylbenzene rubber or buitadiene rubber.
Specialty: 1. After cutting, up automatic, save time& hommization.
2. The blade’s material design specialty, cutting agile.
主要技术参数 Technical Parameters | |
型号 Model | LJ-C600 |
机型Systems | 液压式 |
外型尺寸 Appearance Size L*W*H(mm) | 820*760*1670 |
工作宽度Working Width(mm) | 600 |
功率Power(KW) | 2.2 |
重量Weight(kg) | 300 |
INSTRUCTIONS:
Public equipment
Public equipment:Power: 380V,50Hz.
Host power line: 2.5mm² four-core
1. Add the 68# hydraulic oil until oil gauge reach to 80%.The hydraulic oil should be kept clean and no sundries in oil tank or it will break the oil pump and the electromagnetic valve and affect its durance.
2. Watch out when a bale cutter is working. Keep hands off when the knife is cutting.
3. Hydraulic oil should be renewed regularly (normally once per annum).
4. Do not arbitrarily adjust the pressure of the pump, the normal value being 60kg.
5. Automatic stop and press start switch 2 SEC automatic drop automatically increases. The manual gear should be long pressed to start the concern knife drop, loosen the automatic rise.